Sol Runner XC Paramotor Wing

DescriptionThe Runner XC is our new paramotor wing for experienced pilots looking for comfort, speed and economy focused on long distance and/or long duration flights.Its performance is linked to a gain in speed and comfort for long flights. In thermal conditions, its stable behavior provides security combined with a good ascent.Runner is available in 7 sizes . For pilots looking for longer flights with comfort and fuel economy, we recommend flying to the middle of the weight range . For pilots who like more agility and speed at the expense of fuel consumption, we recommend flying close to the maximum indicated weight.Comparing with our other paramotor wings, we can say that it is the evolution of the Flexus and Auster GT and will suit the most ambitious pilot.Designed for trained pilots with a minimum of 80 hours of experience .The Runner has a 3-4 row hybrid configuration as only such an arrangement allows full adjustment of the profile geometry through the operation of the trimmers.Runner XC – Special for long distancesCertificationInspection Certificate150165180195210225240Certification Number3517351835193520352135223523Load & Resistance TestCERTIF DGAC RUNNER XC flight characteristicsNew construction techniques: weight, volume and drag reduction (Vectran competition lines);Double command: more open and flat curves or steeper curves with a smaller radius;Tie rods: developed for ease of handling;Takeoff: Easy inflation in short space;Landing: prolonged flair facilitating the stop moment (Estoll) and less impact when touching the ground;Use of Full Reflex technology reducing the possibility of collapses;Speed: increased speed due to Reflex technologyIn short, a piece of equipment to satisfy the needs and demands of paramotor pilots who want more performance x ease of use x safety.  New piloting featuresThe ‘shark’s mouth’ (PBP) provides greater aerodynamics of the canopy and greater internal pressure in a wide range of angles of attack. The leading edge is reinforced with braces (BT Technology), which significantly improve take-off and protect against deformation during high-speed flights.The new riser system provides excellent control in accelerated flight. A wider speed range is achieved by using the throttle and trimmers.The Runner comes with a dual pilot control system (2D Dual Control). In the 2D layout, the main control has an auxiliary steering line oriented towards the outer brakes. This system allows the pilot to differentially control the wing tip and trailing edge center, or both, so pilots can adjust the trailing edge pull progression to suit their preferences.The main lines are with covers and the upper ones and the gallery without cover guaranteeing a greater performance, combination of different fabrics give durability, lightness and dimensional stability to the project, thus guaranteeing a good combination in the whole set.  TechnologiesThe RUNNER XC combines our technologies for performance, safety and durability.Constant Pressure (Shark Mouth)4 tie rodsCross SplintsLaser cutHybrid MaterialsWeight distribution tapes3d modelingmini ribsflexible splintsGreatest Elongation designedbow techreflex profiledouble commandYield FlapsHigh Tech MaterialsGallery  Technical Data150165180195210225240cells57575757575757Real Area15.0316.518.019.521.122.524.1m2Actual Wingspan9.489.910.410.811.211.612.0mActual Stretching6.06.06.06.06.06.06.0Projected Area13.0214.315.616.918.219.520.9m2Projected Wingspan7.668.08.48.79.19.49.7mDesigned Stretching4.54.54.54.54.54.54.5Height607635661686711734757cmMaximum Profile195205214222231239247cmMinimum Profile49515456586062cmSail Weight3.74.04.34.54.75.05.3kgTakeoff Weight70-12070-13080-13080-14090-150100-160110-170kgXC Suggested Weight758597109123136150kgCertification(DGAC)(DGAC)(DGAC)(DGAC)(DGAC)(DGAC)(DGAC)MaterialsSince 1991,  SOL  has been producing and accompanying the evolution of materials and products. Our experience leads us to carefully choose the materials used, guaranteeing great durability and a high level of safety. The Runner XC is a SOL  paramotor wing manufactured in its own factory.TopWTX 40 PU Silicon 40 gr/sm – WTX 29 PU Silicon 29 gr/smBottomWTX 40 PU Silicon 40 gr/sm – WTX 29 PU Silicon 29 gr/smprofilesPro-Nyl High Tenacity Nylon rip-stop Hard finish 36 gr/smReinforcementsNylon Maxthread Meada 2.5 mmlinesLiros Dyneema PPSLS 0.7 – 1.1 – 1.2 – 1.6 mm – Cousin Vectran 0.6 – 0.9 – 1.0 – 1.2 mmcarabinersAnsung Precision 20mm. 800 kgtie rodsPolyester Venus 19 mm. 1,600 kgpulleysNylon Sol 12 mm / ISR 16 mm ball bearing  DownloadsManualWarranty termLine Planinfo delivered with